Bump test gas cylinder online store UK: Shielding Gas for Gas Metal Arc Welding: For GMAW the additions of helium range from around 25% helium up to 75% helium in argon. By adjusting the composition of the shielding gas, we can influence the distribution of heat to the weld. This, in turn, can influence the shape of the weld metal cross section and the speed of welding. The increase in welding speed can be substantial, and as labor costs make up a considerable amount of our overall welding costs, this can relate to a potential for significant savings. The weld metal cross section can also be of some consequence in certain applications.

Safety: While argon is a good fit for a variety of welding jobs, it can be a safety risk. As with any gas work, there are steps to take to prevent causing an accident. Argon is stored in high-pressure tanks, and although its inert qualities mean that it doesn’t easily react to other chemicals, it is essential to be fully trained in handling and transporting gases to minimise the risk of accidents and hazards. The risk of gas leaking or spilling needs to be taken seriously; gas should be stored in a well-ventilated room. Argon is colourless and odourless so ensuring ventilation is available and that tanks are sealed adequately is critical.

For low spatter and distortion and better fusion of welding automotive components in the thickness range of 0.5mm to 3mm, Stainshield Light is a better choice. Anyone requiring high-integrity welds, such as those used in pipe work and paneling, for components ranging from 3mm to 12mm, should consider Stainshield Universal’s argon, helium and carbon dioxide mixture. It produces welds with very good low temperature toughness values, excellent corrosion resistance, high penetration and low levels of porosity. Other priorities when choosing a shielding gas. See more info on Calibration gas Cylinder.

The primary task of a shielding gas is to protect the weld pool from the influence of the atmosphere, i.e. from oxidation and nitrogen absorption, and to stabilize the electric arc. The choice of shielding gas can also influence the characteristics of the weld penetration profile. The basic gas for MIG/MAG welding is argon (Ar). Helium (He) can be added to increase penetration and fluidity of the weld pool. Argon or argon/helium mixtures can be used for welding all grades. However, small additions of oxygen (O2) or carbon dioxide (CO2) are usually needed to stabilize the arc, improve the fluidity and improve the quality of the weld deposit. For stainless steels there are also gases available containing small amounts of hydrogen (H2). Zero calibration gas is a gas that does not contain flammable gas. You will need this gas in the calibration of analyser’s or gas detectors. Span calibration gases are a more advanced type of calibration gas. They contain a more precise total make up of detectable gases.

Many of the gases fall within the scope of the Control of Substances Hazardous to Health Regulations (COSHH) 2002 (Amendment) 2004, which require that exposure to them is maintained below concentrations known as Workplace Exposure Limits (WELs). WEL values are given in Guidance Note EH40 from the Health and Safety Executive (HSE), which is usually updated annually. Source: www.weldingsuppliesdirect.co.uk.