Excellent magnetic track lighting wholesale manufacturer: Do Your Homework on Energy Savings: If you’re going to buy LED landscape lighting, then doing your homework on how much money you could save on energy is a must. While it’s true that all of the bulbs are more environmentally friendly, not all of them will save you as much money on your electric bill as others. One way to make sure that you end up saving money long term is to calculate how much electricity each fixture uses per hour and then compare this number with the current energy costs in your area. Some LED lighting options can actually use more electricity than incandescent and fluorescent lights! Discover additional details on https://grnled.com/best-led-down-lights-manufacturer-in-china/waterproof-surface-mounted-downlights.
In terms of size, the magnetic track is mainly divided into two types: 20mm width (M20) and 35mm width (M35). The width of these two track strips determines the width of the corresponding magnetic lamp track head. That is, a 20mm wide track can only be installed with lamps with a 20mm width track head, and 35mm is also the same. Of course, recently there has been another slim type track, only with 15mm available in markets. From the installation way, the magnetic rails include a recessed magnetic track, suspended magnet track, and surface-mounted magnetic rails.
In general, when people say flood lights or spotlights, they mean the same thing. But technically, there are some differences in beam angle. Generally, flood lights have bigger beam angle like 90/120° which is an application for Lighting up the whole scene, suitable for big area lighting. However, the spotlight fixture is with a narrow beam angle like 25/45/60°, These lights look like a beam of light, and generally, the straight-line distance illuminates will be farther than floodlights. Suitable for local lighting to highlight the characteristics of objects.
Smart flood lights: It is including motion sensor, photocell, time control floodlight fixtures, most of them can be turned on/off automatically through some special setup. RGB led flood light: This is color changing or special color such as green, blue, red, yellow types for special application. Solar powered led flood lights: It is the most energy-saving type of floodlight, and it powers the floodlight by converting solar energy into electrical energy. Very suitable for use in countries or regions with sufficient sunlight, such as Africa, the Philippines, Indonesia, Brazil and other places.
Maintenance: Solar street lights require regular maintenance to ensure they are functioning properly. This includes cleaning the panels, replacing batteries, and checking the wiring. Weather Dependent: Solar street lights are dependent on the weather, and may not be able to provide enough light during cloudy or rainy days. Vandalism: Solar street lights are vulnerable to vandalism, as they are often located in remote areas. How long does it take for a solar street light to charge? The amount of time it takes for a solar street light to charge depends on the size of the battery, the amount of sunlight available, and the type of solar panel used. Generally, it takes between 6 and 12 hours for a solar street light to charge fully.
Some of the most common applications of LED floodlights include the following: Stadium fields, such as football field, basketball court, tennis court and other sports spaces. Public places: parks, plaza, gardens, roadway lighting, high mast lighting. Landscape lighting for trees, Industrial lighting for Warehouse, workshop, and factory. Commercial lighting for train stations, subway, parking lots, etc. Horizontal light. Beam angle generally is 120-180° which will improve the efficiency of light utilization, reducing lighting pollution and waste. Long warranty period: 2years warranty at least, it is ok to extend 5 to 10years according to the customer’s requirements.
How to connect the Zigbee Smart Gateway and Smart dimmable magnetic track lights? You need to choose and connect the Zigbee smart gateway after you choose the above magnetic track and lights. And need to connect the magnetic track lights to the gateway(hub). You can download the PDF file to know the detailed steps, also check the video here. Remote control magnetic led track light is a kind of smart lighting, based on 2.4G wireless technology, their color temperature and brightness can be adjusted by a remote controller or 2.4G Bluetooth power switch. The color temperature can be tunable from 3000k to 6500K. and the whole magnetic track light system includes different kinds of luminaires such as grid spotlights, track spotlights, linear floodlights, pendant lights, etc, it is the best way to do DIY lighting for your home, or commercial places.
As a reliable High power Led floodlight manufacturer, supplier, and factory in China, we provide the best quality flood lamps with 50W/modular, 100W/modular, 200W/modular, and 250w/modular available. Their wattage includes 50W 100W 150W 200W 250W 300W 400W 500W 600W 1000W 1200W 1500W 2000W Max. They consist of an aluminum body and PC lens, the IP grade can be IP66. Using the Meanwell/DONE/MOSO/SOSEN/PHILIPS driver and Osram, CREE, Philips Chips, the guarantee is a 5years warranty, lumens output range from 120lm/W-160lm/W. Widely applied for outdoor environments such as high-mast lighting, tunnel lights, and stadium floodlights ( football field, tennis court lighting, basketball lighting, etc.).
Safety: Solar-powered street lights provide a safe and secure environment for pedestrians and drivers. What is the voltage of solar street light? The voltage of solar street lights can vary depending on the type of light and the size of the solar panel. Generally, the voltage of a solar street lamp is between 6V and 24V, the main one is a 3.2V system and a 12.8V system for solar-powered street lights with LiFoPo4 battery, and an 11.1V system for Li-battery.
Third, the temperature of the LED flood light is too high. Generally, this kind of light appears in the LED flood light fixtures with built-in power supply. If the driver has an over-temperature protection function, and the material heat dissipation performance of the lamp cannot meet the requirements, the driver over-temperature protection will start to work and there will be flicker, for example, 20W floodlight housing is used to assemble 30W lamp, in this case, the heat dissipation will be too bad to working well. Read more details at https://grnled.com/.
OEM ODM Service, we can do production or design according to customer’s requirements with much more experience than expected. We always keep the innovation in function and technology for all led lights, producing the best-led products which are popular in markets. And also provide relative technical support, for example, the IES Files to do Dialux simulation or technical training, etc. We will do all legal things for our customers.