Top industrial laser chiller provider? Since 2002, S&A Chiller has been dedicated to industrial chiller units and serving a wide variety of industries, especially the laser industry. Our experience in precision cooling enables us to know what you need and what cooling challenge you are facing. From ±1C to ±0.1C stability, you can always find a suitable water chiller here for your processes. To produce the best quality laser water chillers, we introduced advanced production line in our 18000m2 production base and set up a branch to specifically manufacture sheet metal, compressor & condenser which are the core components of water chiller. Annual production capacity now reaches 100,000+ units per year. Discover additional info on s&a chillers.

Is the laser cutter power the higher the better? Laser cutter has become quite common these days. It offers unmatched cutting quality and cutting speed, which outperforms many traditional cutting methods. But for many people who are the laser cutter users, they often have a misunderstanding – the higher the laser cutter power the better? But is it really the case? Well, absolutely not. In terms of laser power, laser cutter can be divided into low power laser cutter, middle power laser cutter and high power laser cutter. For relatively thin stainless steel sheet and carbon steel sheet, low power laser cutter should be sufficient to perform high quality cutting while maintaining high cutting speed. Choosing the right one can help you not only improve the working efficiency but also save considerable operating cost. So what should be considered when selecting a proper laser cutter?

As a good partner to maintain the stable and continuous operation of laser equipment, chillers are also developing towards higher power with fiber lasers. Taking S&A fiber series chillers as an example, S&A initially developed chillers with a power of 500W and then continued to develop to 1000W, 1500W, 2000W, 3000W, 4000W, 6000W, and 8000W. After 2016, S&A developed the CWFL-12000 chiller with a power of 12 KW, marking that the S&A chiller has also entered the era of 10 KW, and then continued to develop to 20 KW, 30 KW, and 40 KW. S&A continuously develops and improves its products, and is committed to providing customers with stable and reliable high-quality products to ensure the stable, continuous, and efficient operation of laser equipment.

In the actual use, there are often some urgent problems that need to be solved in mold. And the most important one is the cleaning of the mold. Some metal molds are used to be the prototyping of high temperature hot melting material. When the products have finished and are taken out from the molds, there are often material residue left on the molds. This requires people to clean the molds, for this will affect the next product making, but that would be quite time consuming. What’s more, molds are easy to get rusty. Since most of the industrial molds are made from steel, they would become rusty after being used for a period of time. And molds need to be cleaned properly before they are used on the machine. However, traditional cleaning would cost a huge labor and cost, which is very bad for the manufacturers.

S&A CWFL series air cooled chillers could be your ideal cooling solution. They are designed with dual temperature control functions and applicable to cool 500W to 30000W fiber laser. Sizing the chiller is generally determined by the power of the fiber laser. CO2 laser is commonly used in laser cutting, laser engraving and laser marking on non-metal materials. But whether it is DC tube (glass) or RF tube(metal), overheating is likely to happen, causing expensive maintenance and affecting the laser output. Therefore, maintaining consistent temperature is of utmost importance to CO2 laser. Find more info on https://www.teyuchiller.com/.