Best synthetic blood penetration test equipment factory? GESTER instruments is a national high-tech textile testing equipment manufacturers engaged in R&D and production of high precision physical properties textile testing instruments with 22 years experience, expertly specialized in providing integrated laboratory testing solutions for children’s products, textile, footwear and furniture. It has passed ISO 9001 certificate, “AAA Enterprise in Quality, Service and Credit” and was audited as SGS audited supplier. Find additional information at synthetic blood penetration tester.
This bursting strength tester use pneumatic method, meet multinational standards and equipped with several changeable test clamp. The simple interface touching screen controller is easy and simple to handle. The specimen was clamped firmly by the pneumatic force which can also save effort. The test cover was made up of high-transparent glass with LED light inside which can observe the specimen easily. The Bursting Strength Testing Machine can induct the burst automatically which is much more sensitive and reliable. The bursting distension can go up to 75mm.
Correct use of computerized universal testing machine: Make sure all wiring is correct before the tensile testing machine is operated and preheat for at least 15 minutes to package the stability of the sensor. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to the fixture and the sample. When pressing the fast up button or the fast down button, do not put your hand between the moving beam and the fixed specimen, fixture or test device to avoid injury.
Testing to ASTM D4060 involves mounting a flat specimen to a turntable that rotates horizontally at a fixed speed. Two arms, each supporting an abrading wheel, are then lowered so that each wheel touches the surface. Before starting the test, a “suction arm” is lowered between the wheels to remove the abraded material from the sample’s surface. The turntable then starts rotating forcing rub-wear action of the wheels against the sample’s surface for the specified number of cycles or until a given mass of coating has been lost or until the wheels start exposing the substrate.
Equip with procedure time counter, digital temperature controller, auto temperature & time control, it has alarm hint while experiment ending.Can customize cup compound mode according to customers requirements. Samples Preparation: Place the samples and multi-fiber adjacent fabric under the constant temperature and humidity (temperature: 21±1℃, humidity: 65%±3%) for 4 hours. Cut 40mm*100mm specimen and multi-fiber adjacent fabric, and suture the specimen and multi-fiber adjacent fabric face to face along one short side. See more info at gesterinstruments.com.